Esphome p1meter victron version » Geschiedenis » Revisie 2
Revisie 1 (Micha Kersloot, 27-06-2023 22:34) → Revisie 2/4 (Micha Kersloot, 28-06-2023 15:15)
h1. Esphome p1meter victron version based on https://github.com/NuKeMtje/ESPHomeDSMRVictron and https://github.com/freakent/dbus-mqtt-devices is needed on the GX device. <pre> substitutions: name: p1meter friendly_name: p1meter esphome: name: ${name} friendly_name: ${friendly_name} #esp8266: # board: esp01_1m # esp32: board: ttgo-t7-v13-mini32 framework: type: arduino # Enable logging logger: # Serial logging is disabled by setting the logger baud rate to 0. # Otherwise the logger will occupy the hardware UART, making it unavailable # for receiving smart meter data on pin D7 (GPIO13). baud_rate: 0 # Enable Home Assistant API api: encryption: key: "qf1fx8kUj0uTiCK59UTTZalztwe8G1uZpOosMvvrV4E=" ota: password: "71b4ad566e816a7f8acb70e75ab94b21" wifi: ssid: !secret wifi_ssid password: !secret wifi_password # Enable fallback hotspot (captive portal) in case wifi connection fails ap: ssid: "P1Meter Fallback Hotspot" password: "YPlPB0mxRpxD" captive_portal: uart: id: uart_bus rx_pin: # number: 3 number: GPIO16 inverted: true baud_rate: 115200 rx_buffer_size: 1700 dsmr: request_pin: GPIO19 globals: - id: portal_id type: std::string restore_value: no initial_value: '"<not set>"' - id: device_instance type: std::string restore_value: no initial_value: '"<not set>"' mqtt: broker: venus discovery: false birth_message: topic: device/p1mqtt/Status payload: "{ \"clientId\": \"p1mqtt\", \"connected\": 1, \"version\": \"v1.0\", \"services\": {\"meter1\": \"grid\"} }" will_message: topic: device/p1mqtt/Status payload: "{ \"clientId\": \"p1mqtt\", \"connected\": 0, \"services\": {\"meter1\": \"grid\"} }" on_json_message: topic: device/p1mqtt/DBus then: - lambda: |- id(portal_id) = x["portalId"].as<std::string>(); id(device_instance) = x["deviceInstance"]["meter1"].as<std::string>(); - mqtt.publish_json: topic: !lambda |- return str_sprintf("W/%s/grid/%s/CustomName", id(portal_id).c_str(), id(device_instance).c_str()); payload: |- root["value"] = "P1-MQTT Meter"; - mqtt.publish_json: topic: !lambda |- return str_sprintf("W/%s/grid/%s/Role", id(portal_id).c_str(), id(device_instance).c_str()); payload: |- root["value"] = "grid"; sensor: - platform: dsmr energy_delivered_tariff1: name: Energy Delivered Tariff 1 id: energy_delivered_t1 state_class: total_increasing energy_delivered_tariff2: name: Energy Delivered Tariff 2 id: energy_delivered_t2 state_class: total_increasing energy_returned_tariff1: name: Energy Returned Tariff 1 id: energy_returned_t1 energy_returned_tariff2: name: Energy Returned Tariff 2 id: energy_returned_t2 power_delivered: name: Power Consumed id: power_consumed power_returned: name: Power Returned id: power_returned electricity_failures: name: Electricity Failures electricity_long_failures: name: Electricity Long Failures voltage_l1: name: Voltage L1 id: voltage_l1 on_value: then: - mqtt.publish_json: topic: !lambda |- return str_sprintf("W/%s/grid/%s/Ac/L1/Voltage", id(portal_id).c_str(), id(device_instance).c_str()); payload: |- root["value"] = id(voltage_l1).state; voltage_l2: name: Voltage L2 id: voltage_l2 on_value: then: - mqtt.publish_json: topic: !lambda |- return str_sprintf("W/%s/grid/%s/Ac/L2/Voltage", id(portal_id).c_str(), id(device_instance).c_str()); payload: |- root["value"] = id(voltage_l2).state; voltage_l3: name: Voltage L3 id: voltage_l3 on_value: then: - mqtt.publish_json: topic: !lambda |- return str_sprintf("W/%s/grid/%s/Ac/L3/Voltage", id(portal_id).c_str(), id(device_instance).c_str()); payload: |- root["value"] = id(voltage_l3).state; current_l1: name: Current L1 id: current_l1 on_value: then: - mqtt.publish_json: topic: !lambda |- return str_sprintf("W/%s/grid/%s/Ac/L1/Current", id(portal_id).c_str(), id(device_instance).c_str()); payload: |- root["value"] = id(current_l1).state; current_l2: name: Current L2 id: current_l2 on_value: then: - mqtt.publish_json: topic: !lambda |- return str_sprintf("W/%s/grid/%s/Ac/L2/Current", id(portal_id).c_str(), id(device_instance).c_str()); payload: |- root["value"] = id(current_l2).state; current_l3: name: Current L3 id: current_l3 on_value: then: - mqtt.publish_json: topic: !lambda |- return str_sprintf("W/%s/grid/%s/Ac/L3/Current", id(portal_id).c_str(), id(device_instance).c_str()); payload: |- root["value"] = id(current_l3).state; power_delivered_l1: name: Power Delivered L1 id: power_delivered_l1 power_delivered_l2: name: Power Delivered L2 id: power_delivered_l2 power_delivered_l3: name: Power Delivered L3 id: power_delivered_l3 power_returned_l1: name: Power Returned L1 id: power_returned_l1 power_returned_l2: name: Power Returned L2 id: power_returned_l2 power_returned_l3: name: Power Returned L3 id: power_returned_l3 gas_delivered: name: Gas Delivered - platform: template name: "Total power" id: total_power lambda: |- return (id(power_consumed).state - id(power_returned).state)*1000.0; update_interval: 1s device_class: power state_class: measurement unit_of_measurement: W on_value: then: - mqtt.publish_json: topic: !lambda |- return str_sprintf("W/%s/grid/%s/Ac/Power", id(portal_id).c_str(), id(device_instance).c_str()); payload: |- root["value"] = id(total_power).state; - platform: template name: "Power L1" id: power_l1 lambda: |- return (id(power_delivered_l1).state - id(power_returned_l1).state)*1000.0; update_interval: 1s device_class: power state_class: measurement unit_of_measurement: W on_value: then: - mqtt.publish_json: topic: !lambda |- return str_sprintf("W/%s/grid/%s/Ac/L1/Power", id(portal_id).c_str(), id(device_instance).c_str()); payload: |- root["value"] = id(power_l1).state; - platform: template name: "Power L2" id: power_l2 lambda: |- return (id(power_delivered_l2).state - id(power_returned_l2).state)*1000.0; update_interval: 1s device_class: power state_class: measurement unit_of_measurement: W on_value: then: - mqtt.publish_json: topic: !lambda |- return str_sprintf("W/%s/grid/%s/Ac/L2/Power", id(portal_id).c_str(), id(device_instance).c_str()); payload: |- root["value"] = id(power_l2).state; - platform: template name: "Power L3" id: power_l3 lambda: |- return (id(power_delivered_l3).state - id(power_returned_l3).state)*1000.0; update_interval: 1s device_class: power state_class: measurement unit_of_measurement: W on_value: then: - mqtt.publish_json: topic: !lambda |- return str_sprintf("W/%s/grid/%s/Ac/L3/Power", id(portal_id).c_str(), id(device_instance).c_str()); payload: |- root["value"] = id(power_l3).state; - platform: template name: "Total consumed" id: total_consumed lambda: |- return id(energy_delivered_t1).state + id(energy_delivered_t2).state; update_interval: 1s device_class: energy state_class: total_increasing unit_of_measurement: kWh on_value: then: - mqtt.publish_json: topic: !lambda |- return str_sprintf("W/%s/grid/%s/Ac/Energy/Forward", id(portal_id).c_str(), id(device_instance).c_str()); payload: |- root["value"] = id(total_consumed).state; - platform: template name: "Total injected" id: total_injected lambda: |- return id(energy_returned_t1).state + id(energy_returned_t2).state; update_interval: 1s device_class: energy state_class: total_increasing unit_of_measurement: kWh on_value: then: - mqtt.publish_json: topic: !lambda |- return str_sprintf("W/%s/grid/%s/Ac/Energy/Reverse", id(portal_id).c_str(), id(device_instance).c_str()); payload: |- root["value"] = id(total_injected).state; text_sensor: - platform: dsmr identification: name: Identification id: meter_id on_value: then: - mqtt.publish_json: topic: !lambda |- return str_sprintf("W/%s/grid/%s/Serial", id(portal_id).c_str(), id(device_instance).c_str()); payload: |- root["value"] = id(meter_id).state; p1_version: name: Version </pre>